Posted by Daniel on July 10, 2001 at 22:25:00:
The Jacquard metal tips have a small plastic piece on the inside.
This is what used to clogg my finely strained paste. I have used a
pin to remove that plastic particle.
Now, I don't have any more clogging moments.
I use a .7mm because it allows me to have both narrow and wide lines.
On the wider tips like .7 or .9 mm, you can squeeze and pull the
henna paste in a line which makes a finer line. Unfortunately you
cannot get very wide lines with the .5mm tip.
|Served by ruboard 2.1.1; Copyright © 1998 by Andrew Maltsev.|